| Hot-Rolled Bands Produced to the Following: |
| Specification | Typical Grades |
| C-1006 thru C-1025 | Commercial Quality |
| ASTM A-36 | Chemical & Physical |
A1011C**
(FORMERLY ASTM A-569) | Commercial Quality |
A1011HF**
(FORMERLY ASTM A-715) | 50, 60 |
| ASTM A-635 | Commercial Quality |
| ASTM A-659 | Commercial Quality |
A1011SG**
(FORMERLY ASTM A-570) | 30, 33, 40 ,45, 50, 55 |
| ASTM A-572 (HSLA) | 35, 45, 50, 55, 60 |
A1011HG** (HSLA)
(FORMERLY ASTM A-607)
| 35, 45, 50, 55, 60 |
| ASTM A-606 (CR) | Type 4 |
| SAE or AISI | 1030, 1045, 1050 |
| HSLA Steel | 4130, 4140, 4150 |
| ASTM A-53 | A, B |
| ASTM A-252 | I, II, III (Piling Pipe) |
| API 5L | A, B, X42, X46, X52, X60 |
Calcium Treated / Drawing Quality / Drawing Quality AK.
Other grades available on an inquiry basis. |
| _____________________________________________________ |
Typical chemistries shown. Please inquire on all other chemistries.
 |
|
|
| Size Range |
| Gauge |
| Width | Max. | Min. |
| Low Carbon | 24" - 39.9" | 0.625 | 0.134 |
| (<.26) | 40" - 49.9" | 0.625 | 0.134 |
| | 50" - 60" | 0.595 | 0.134 |
|
| Medium Carbon | 24" - 29.9" | 0.625 | 0.134 |
| (.26 - .40) | 30" - 39.9" | 0.600 | 0.150 |
| | 40" - 49.9" | 0.575 | 0.180 |
| | 50" - 54.9" | 0.575 | 0.220 |
| | 55" - 60" | 0.525 | 0.250 |
| | | |
| Alloy & | 24" - 29.9" | 0.500 | 0.150 |
| High Carbon | 30" - 35.9" | 0.500 | 0.170 |
| (>.40) | 36" - 49.9" | 0.500 | 0.220 |
| | 50" - 54.9" | 0.500 | 0.250 |
| C1050 | 24" - 30" | 0.375 | 0.250 |
|
| _____________________________________________________ |
| Width | | Average Coil Weight |
| 24" - 30" | | 17500 - 19500 lbs. |
| 31" - 40" | | 23000 - 24500 lbs. |
| 41" - 50" | | 22500 - 25000 lbs. |
| 51" - 60" | Gauge < .180 | 28500 - 29500 lbs. |
| 51" - 60" | Gauge > .180 | 29500 - 32000 lbs. |
|
| _____________________________________________________ |
| PIW |
| WIDTH | MAX PIW |
| 24" - 48" | 825 |
| 49" - 56" | 750 |
| 57" - 60" | 675 |
| _____________________________________________________ |
Above .450 cannot be ordered with cropped ends.
.189 and lighter - Recommend temper passing for flatness
Coil I.D. = 30"
Coil O.D. 40" min. - 70" max.
Gauge tolerance - Guarantee ASTM; AIM Half-Standard
Width tolerance - Guarantee ASTM; AIM Half-Standard |
|
|
| Ladle Chemical Ranges and Limits - Selected Grades |
| Steel Designation | Chemical Composition Limits (percent) |
| SAE or AISI | C | Mn | Ni | Cr | Mo |
| Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. |
| 1010 | 0.08 | 0.13 | 0.30 | 0.60 | - | - | - | - | - | - |
| 1018 | 0.15 | 0.20 | 0.60 | 0.90 | - | - | - | - | - | - |
| 1018 Modified | 0.15 | 0.20 | 1.00 | 1.20 | - | - | - | - | - | - |
| 1020 | 0.18 | 0.23 | 0.30 | 0.60 | - | - | - | - | - | - |
| 1026 | 0.22 | 0.28 | 0.60 | 0.90 | - | - | - | - | - | - |
| 1030 | 0.28 | 0.34 | 0.60 | 0.90 | - | - | - | - | - | - |
| 10B30 | 0.28 | 0.34 | 0.60 | 0.90 | - | - | - | - | - | - |
| 1035 | 0.32 | 0.38 | 0.60 | 0.90 | - | - | - | - | - | - |
| 1045 | 0.43 | 0.50 | 0.60 | 0.90 | - | - | - | - | - | - |
| 15B21 | 0.18 | 0.23 | 0.90 | 1.20 | - | - | - | - | - | - |
| 1526 | 0.24 | 0.29 | 1.15 | 1.40 | - | - | - | - | - | - |
| 1536 | 0.30 | 0.38 | l.20 | 1.55 | - | - | - | - | - | - |
| 4118 | 0.18 | 0.23 | 0.70 | 0.90 | - | - | 0.40 | 0.60 | 0.08 | 0.15 |
| 4130 | 0.28 | 0.33 | 0.40 | 0.60 | - | - | 0.80 | 1.10 | 0.15 | 0.25 |
| 4140 | 0.38 | 0.43 | 0.75 | 1.00 | - | 0.18 | 0.80 | 1.10 | 0.15 | 0.25 |
| 5046 | 0.43 | 0.48 | 0.75 | 1.00 | - | - | 0.20 | 0.35 | - | - |
|
|
|
 |
